How Much Powder For 9Mm
How Much Powder For 9Mm. But have yet to settle on anything for 124grain. The gdhp is jacketed and lists much higher charges (and a longer col).
There are plenty of powders that can be used. These are near maximum loads, you should use 10% less to start.) (see note on powders below or read all about various powders.) bullet size is.355″ (jacketed) in diameter. I don't think you can get 11.4 grains of wsf in a 9mm case without overflowing or at least reaching right near the top of the case.
I Have Used Pretty Much Every Powder At One Time Titegroup Is Best For Titewads Meaning You Get More Rounds Per Pound But Is Snappy Compared To Slower Powder Like Pp, Hs6, Wsf, V340,3N37 Etc Etc Etc.
Iirc, one ounce of powder equals 458 grains. Also trail boss but i don’t think that would work so hot in 9mm lol. I use these powders for target or practice loads in 9mm,.38 special, how to choose the best 9mm round for personal defense 9mm bullet weights range from 115 to 147 grains and velocities from 1,200 to 1,000.
$0.04 *Powder Drop Recommendations Will Vary By Manufacturer According Bullet Grain, Bullet Type, And.
If it were me, i would start at 4.1 with a col of 1.125 and see how it cycles. Over time, that will easily repay for the cost of the loading equipment, and those running 10,000 to 20,000 rounds a year find it happens. Berry's (plated) 124gr, min 3.6, max 4.1, col 1.15.
I Have A Few Powders On Hand Tightgroup, W231, Cfe Pistol & Unique.
Due to different barrel lengths, type of bullet, seating depth, primer type and other factors, you may not. 9mm +p could be a little higher with up to 6 grains and i have seen some. Tried and true 9mm load.
This Can Vary Though Depending On The Type Of Load You Want.
To the op, as others have mentioned, 1 pound of powder equals 7,000 grains so the short answer is that for your typical 9mm load you can get. A 9mm luger uses about 6 grains of powder per round for a close to factory load. But most loads use roughly 6 grains.
Hornady Lnl Ap, 9Mm & 45Acp.
Loads for 9 mm luger: Lrn 115gr, min 3.9, max 4.3, col 1.1. These are near maximum loads, you should use 10% less to start.) (see note on powders below or read all about various powders.) bullet size is.355″ (jacketed) in diameter.
Post a Comment for "How Much Powder For 9Mm"